Call 08047647235 85% Response Rate

Send Email

Oil Seal

The usage of the oil seals in areas concerned with motion also earns them a name of “Dynamic Oil Seals.”
Oil seals find great deal of usage in gearboxes, hydraulic cylinders, etc. Oilseal or shaft seals are an integral part in any rotating and moving part assembly.

Based on the application of the oil seal, the outer skin layer tends to differ. Here are some types of the materials used for the outer skin of the oil seal.

1. Nitrile rubberThe commonly used material for oil seals
2. SiliconeUsed in specific applications where only light loads are applied.
3. EPDMEthylene Propylene Di Amine
4. Fluroelastomer also popularly known as Viton. – The high temperature resistant material used in places where temperature is more than 120 Degree Celcius.
HNBR Oil Seal
  • HNBR Oil Seal
  • HNBR Oil Seal
  • HNBR Oil Seal
  • HNBR Oil Seal
  • HNBR Oil Seal
  • HNBR Oil Seal
  • HNBR Oil Seal
  • HNBR Oil Seal
  • HNBR Oil Seal
  • HNBR Oil Seal
  • HNBR Oil Seal

HNBR Oil Seal

Product Price: Rs 35 / PieceGet Best Price

Minimum Order Quantity: 20 Piece

Product Details:
SizeAs per client requirement
ColorBlack
MaterialHNBR - Hydrogenated nitrile rubber
Packaging Typeexport quality
Product TypeOil Seal
Temperature-40 DegreeC to + 150 DegreeC.

 

HNBR - Hydrogenated nitrile rubber

 

The chemical structure of this elastomer (obtained by hydrogenating an appropriate type of NBR nitrile rubber) allows achieving, especially if vulcanized with a peroxide system, an average heat resistance 30°C above that of nitrile rubber, and an excellent abrasion resistance.

Its resistance to oils and solvents is on average slightly superior to that of nitrile rubber, except for special cases. It is therefore recommended for:

- heat resistance

- ozone resistance

- abrasion resistance.

 

The temperature range is from -40°C to + 150°C.

 



Additional Information:

  • Packaging Details: Box Packaging
Get Best QuoteRequest A Callback
Oil Seals
  • Oil Seals
  • Oil Seals
  • Oil Seals
  • Oil Seals
  • Oil Seals
  • Oil Seals
  • Oil Seals
  • Oil Seals
  • Oil Seals
  • Oil Seals
  • Oil Seals

Oil Seals

Product Price: Rs 15 / PieceGet Best Price

Product Details:
Usage/ApplicationIndustrial
SizeAs per client requirement
MaterialRubber
Packaging TypeBox
ColorBlack
Pressurebetween 200 and 3,500 PSI
Hardness50 to 70 Shore
Temperature-15 DegreeC to +100 DegreeC
We are a well-known manufacturer and supplier of impeccable quality Oil Seals that are used in mechanical, automotive and engineering industries. So as to manufacture these seals, quality tested raw material and the latest technology is used by our professionals in sync with industry standards. The offered seals are thoroughly tested on different quality measures to ensure flawless product at user end. 

Oil seals – often called grease, fluid or dirt seals – close spaces between stationary and moving components in mechanical equipment, helping prevent lubricant escape. They also stop harmful contaminants from entering machinery, particularly in severe environments. Vital components of practically every type of machine and vehicle in operation, oil seals protect all types of precision-constructed, close-fitting ball, sleeve and roller bearings.


In precision bearings, oil seals help prevent lubricants from escaping the bearings or a specific area. In machine components, oil seals help prevent abrasives, corrosive moisture and other harmful contaminants from entering machinery. They also help stop intermixture of two different mediums, such as lubricating oil and water.



Additional Information:

  • Packaging Details: Box Packing : L cm x B cm x H cm
Get Best QuoteRequest A Callback
Metallic Oil Seal
  • Metallic Oil Seal
  • Metallic Oil Seal
  • Metallic Oil Seal
  • Metallic Oil Seal
  • Metallic Oil Seal
  • Metallic Oil Seal
  • Metallic Oil Seal

Metallic Oil Seal

Product Price: Rs 35 / PieceGet Best Price

Product Details:
SizeCustomized
ColorBlack
MaterialNBR,Nitrile,Neoprene,Viton,EPDM,Silicone
Packaging TypeExport quality
Payment Terms100% Advance
ShapeCustomized

Type: Customized molding Metallic Oil Seal

 

Material: As per the requirement.

Color and size: Different sizes and White in colors can be produced according to your drawings and pictures

 

Technics: Custom rubber molding

 

Packing: Plastic bag; Outer Packing:Carton

 

Application: Automotive, machinery, bathroom facilities,medical, household electrical appliances etc.Be widely used for different industry or our daily life

Get Best QuoteRequest A Callback
Hydrogenated Nitrile Oil Seal
  • Hydrogenated Nitrile Oil Seal
  • Hydrogenated Nitrile Oil Seal
  • Hydrogenated Nitrile Oil Seal
  • Hydrogenated Nitrile Oil Seal
  • Hydrogenated Nitrile Oil Seal
  • Hydrogenated Nitrile Oil Seal
  • Hydrogenated Nitrile Oil Seal
  • Hydrogenated Nitrile Oil Seal
  • Hydrogenated Nitrile Oil Seal
  • Hydrogenated Nitrile Oil Seal
  • Hydrogenated Nitrile Oil Seal
  • Hydrogenated Nitrile Oil Seal
  • Hydrogenated Nitrile Oil Seal

Hydrogenated Nitrile Oil Seal

Product Price: Rs 35 / PieceGet Best Price

Product Details:
MaterialHNBR
Usage/ApplicationIndustrial
BrandWe manufacture our own products
ColorAs per client requirement
SizeAs per client requirement
ResistantDepend upon material
DiameterAs per client requirement
Packaging TypeBox
Product TypeOil Seal
ShapeRound
TemperatureDepend upon material
Country of OriginMade in India

HNBR - Hydrogenated nitrile rubber

 

The chemical structure of this elastomer (obtained by hydrogenating an appropriate type of NBR nitrile rubber) allows achieving, especially if vulcanized with a peroxide system, an average heat resistance 30°C above that of nitrile rubber, and an excellent abrasion resistance.

Its resistance to oils and solvents is on average slightly superior to that of nitrile rubber, except for special cases. It is therefore recommended for:

- heat resistance

- ozone resistance

- abrasion resistance.

 

The temperature range is from -40°C to + 150°C.



Additional Information:

  • Delivery Time: Depend upon quantity
  • Packaging Details: Box Packaging
Get Best QuoteRequest A Callback
Earthmover Oil Seal
  • Earthmover Oil Seal
  • Earthmover Oil Seal
  • Earthmover Oil Seal
  • Earthmover Oil Seal
  • Earthmover Oil Seal
  • Earthmover Oil Seal
  • Earthmover Oil Seal
  • Earthmover Oil Seal

Earthmover Oil Seal

Product Price: Rs 55 / PieceGet Best Price

Minimum Order Quantity: 10 Piece

Product Details:
BrandWe manufacture our own product
Usage/ApplicationIndustrial
SizeCustomized
ColorBlack
DesignCustomized
Hardness45 to 80 Shore
WeightDepend upon size
Temperature Range-10 DegreeC to + 130 DegreeC.
MaterialCustomized
Avail from us Rubber Oil Seal, which is in tandem with international quality norms. To ensure the same, we manufacture the offered oil seals at our sound infrastructure by making use of high grade raw material, sourced from the trustworthy vendors of the industry. We also keep in mind the prevailing industrial norms while manufacturing the offered oil seals. Under the offered array, we provide Carbo-Oil Seal and Metallic Oil Seal.
Get Best QuoteRequest A Callback
Neoperene Rubber Oil Seal
  • Neoperene Rubber Oil Seal
  • Neoperene Rubber Oil Seal
  • Neoperene Rubber Oil Seal
  • Neoperene Rubber Oil Seal
  • Neoperene Rubber Oil Seal
  • Neoperene Rubber Oil Seal
  • Neoperene Rubber Oil Seal
  • Neoperene Rubber Oil Seal
  • Neoperene Rubber Oil Seal
  • Neoperene Rubber Oil Seal
  • Neoperene Rubber Oil Seal

Neoperene Rubber Oil Seal

Product Price: Rs 19 / PieceGet Best Price

Minimum Order Quantity: 10 Piece

Product Details:
Usage/ApplicationIndustrial
SizeCustomized
ColorBlack
DesignCustomized
Hardness40 to 75 Shore
Packaging TypeExport Quality
ShapeRound
Temperature Range40 to +100 Degree C
MaterialNeoprene

The most widely used elastomer in most current applications. It is particularly recommended in case of contact with:
- Mineral oils and fats (oils for engines, gearboxes, differentials, etc.)
- Hydraulic oils
- Water and aqueous solutions.

The temperature range varies from -10°C to + 110°C.

Oil Seal made from neoprene rubber are used widely. Neoprene rubber oil seals perform well in many industry. These oil seal have excellent resistance to oil, have a practical temperature service range, resistance to oxidation and aging, and generally cost less than other oil seals made from more advanced elastomers.

 



Additional Information:

  • Port of Dispatch: MUMBAI
  • Packaging Details: EXPORT PACKING.
Get Best QuoteRequest A Callback
SC Oil Seals
  • SC Oil Seals
  • SC Oil Seals
  • SC Oil Seals
  • SC Oil Seals
  • SC Oil Seals
  • SC Oil Seals

SC Oil Seals

Product Price: Rs 22 / PieceGet Best Price

Minimum Order Quantity: 10 Piece

Product Details:
BrandWe manufacture our own products
Usage/ApplicationIndustrial
SizeAs per cllient requirement
MaterialAs per client requirement
Model Name/NumberSC type
Packaging TypePacket
ColorDepend upon requirement
Hardness65 to 85 shore
Product TypeOil Seal
TemperatureDepend upon the material
Is It CustomizedCustomized
I Deal InNew Only
Country of OriginMade in India
Description

The SC profile is a shaft seal composed of a single metal cage with a rubber coating and a primary sealing lip with integrated spring.

Advantages

 

  • Very good static sealing
  • Very good thermal expansion compensation
  • Greater roughness is allowed in the housing
  • Reduced risk of corrosion
  • Sealing for low and high viscosity fluids
  • Modern primary sealing lip with low radial forces

 

Applications

 

  • Shaft sealing
  • Motors
  • Pumps
  • Transmissions

 

MaterialsRubber

Neoprene 70 - 75 Shore A
EPDM 70 - 75 Shore A
FKM 70 - 75 Shore A
HNBR 70 - 75 Shore A
NBR 70 - 75 Shore A

Metal cage

Steel

Spring

 

Steel
Stainless steel



Additional Information:

  • Packaging Details: Box Packaging
Get Best QuoteRequest A Callback
Viton Oil Seal
  • Viton Oil Seal
  • Viton Oil Seal
  • Viton Oil Seal
  • Viton Oil Seal
  • Viton Oil Seal
  • Viton Oil Seal
  • Viton Oil Seal
  • Viton Oil Seal
  • Viton Oil Seal
  • Viton Oil Seal
  • Viton Oil Seal
  • Viton Oil Seal
  • Viton Oil Seal

Viton Oil Seal

Get Latest Price

Product Details:
Pressure1450 PSI (10 MPa)
SizeCustomized
Hardness60 to 85 Shore
Product TypeViton Oil Seal
Temperature-23 degree C to 315 degree C (-10 degree F to 600 degree F)
CertificateIn House Certificate

Viton elastomer has exceptional heat and chemical resistance. Its properties remain indefinitely stable up to about 300°C. It offers excellent performances in contact with:

- aliphatic hydrocarbons

- aromatic hydrocarbons (toluene, benzene, xylene)

- vegetable and mineral oils and fats, even if containing additives

- chlorinated solvents

- ozone

- light and atmospheric agents.

 

The temperature range is from -30°C to + 300°C.

Advantage: high temperature resistance, good resistance to oil, fuel, lubricants, good compression set and supper cost-effective

Application: automobile, mining, machinery, chemical equipment, engineering construction and etc. 



Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer),Other
  • Port of Dispatch: MUMBAI
  • Packaging Details: EXPORT PACKING.
Get Best QuoteRequest A Callback
NBR Oil Seal
  • NBR Oil Seal
  • NBR Oil Seal
  • NBR Oil Seal
  • NBR Oil Seal
  • NBR Oil Seal
  • NBR Oil Seal
  • NBR Oil Seal
  • NBR Oil Seal
  • NBR Oil Seal
  • NBR Oil Seal
  • NBR Oil Seal
  • NBR Oil Seal
  • NBR Oil Seal

NBR Oil Seal

Product Price: Rs 12 / PieceGet Best Price

Minimum Order Quantity: 10 Piece

Product Details:
MaterialRubber
BrandWe manufacture our own products
Usage/ApplicationIndustrial
SizeAs per client requirement
ColorBlack
Hardness60 to 90 Shore A
WeightDepend upon requirement
Packaging TypeBox
ShapeRound
Country of OriginMade in India

The most widely used elastomer in most current applications. It is particularly recommended in case of contact with:
- Mineral oils and fats (oils for engines, gearboxes, differentials, etc.)
- Hydraulic oils
- Water and aqueous solutions.

The temperature range varies from -30°C to + 120°C.

Oil Seal made from nitrile (Buna N) rubber are used widely. Nitrile rubber oil seals perform well in many industry. These oil seal have excellent resistance to oil, have a practical temperature service range, resistance to oxidation and aging, and generally cost less than other oil seals made from more advanced elastomers.



Additional Information:

  • Delivery Time: Depend upon quantity
  • Packaging Details: Box Packaging
Get Best QuoteRequest A Callback
EPDM Oil Seal
  • EPDM Oil Seal
  • EPDM Oil Seal
  • EPDM Oil Seal
  • EPDM Oil Seal
  • EPDM Oil Seal
  • EPDM Oil Seal
  • EPDM Oil Seal
  • EPDM Oil Seal
  • EPDM Oil Seal
  • EPDM Oil Seal
  • EPDM Oil Seal

EPDM Oil Seal

Product Price: Rs 19 / PieceGet Best Price

Minimum Order Quantity: 5 Piece

Product Details:
MaterialEpdm Rubber
Usage/ApplicationIndustrial
ColorBlack
Hardness60 to 80 Shore A
Product TypeOil Seal
Temperature-50 DegreeC to +120 Degree/150 DegreeC (-60 DegreeF to +250 Degree/300 DegreeF)
Is It CustomizedCustomized

EPDM - Ethylene-propylene rubber

This rubber is based on ethylene-propylene plus a third (diene) monomer which allows its reticulation with sulphur. Due to its chemical structure, it has a peculiar resistance to fluids such as water and steam and environments such as ozone, which recommends its use for:
- water, up to boiling point
- steam
- particular hydraulic systems, such as braking systems
- ozone
- atmospheric agents
- bases
- polar solvents at ambient temperature.

The temperature range is from -50°C to + 150°C.



Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer),Other
  • Port of Dispatch: MUMBAI
  • Packaging Details: EXPORT PACKING.
Get Best QuoteRequest A Callback
Energized Spring PTFE Seals
  • Energized Spring PTFE Seals
  • Energized Spring PTFE Seals
  • Energized Spring PTFE Seals
  • Energized Spring PTFE Seals
  • Energized Spring PTFE Seals
  • Energized Spring PTFE Seals

Energized Spring PTFE Seals

Product Price: Rs 50 / PieceGet Best Price

Minimum Order Quantity: 10 Piece

Product Details:
MaterialPTFE
Usage/ApplicationIndustrial
SizeAs per client requirement
ColorAs per client requirement
BrandWe manufacturer our own brand
LengthAs per client requirement
ShapeRound
Packaging TypeBox Packaging
StyleEnergized Seal
TemperatureDepend upon material
Product TypeSpring Seal
DiameterDepend upon client requirement
PressureDepend upon material
Country of OriginMade in India

Spring energized PTFE seals perform reliably in a variety of applications where conventional elastomeric seals fail due to chemical attack, extreme heat or cold, friction, extrusion or compression set.

PTFE seals have three basic design elements:

  • A pressure-actuated U-shaped jacket
  • A metal spring loading device
  • High performance polymeric seal materials
Its a spring-energized U-cup that uses a variety of jacket profiles, spring types and materials in rod and piston, face and rotary seal configurations. They are used when elastomeric seals fail to meet temperature range, chemical resistance or friction requirements.

Some of the more remarkable capabilities of the seal include:

  • Very low friction
  • Universal chemical compatibility
  • High speed service
  • Cryogenic service to -425 degrees Fahrenheit
  • High temperature service to 575 degrees Fahrenheit
  • High pressure ratings (over 30 Kpsi)
  • Permanent elasticity with immunity to aging embrittlement and compression set.


Additional Information:

  • Delivery Time: Depend upon quantity required
  • Packaging Details: Box Packaging
Get Best QuoteRequest A Callback
High Temperature Oil Seals
  • High Temperature Oil Seals
  • High Temperature Oil Seals
  • High Temperature Oil Seals
  • High Temperature Oil Seals
  • High Temperature Oil Seals
  • High Temperature Oil Seals
  • High Temperature Oil Seals
  • High Temperature Oil Seals
  • High Temperature Oil Seals
  • High Temperature Oil Seals
  • High Temperature Oil Seals
  • High Temperature Oil Seals
  • High Temperature Oil Seals

High Temperature Oil Seals

Product Price: Rs 40 / PieceGet Best Price

Product Details:
Packaging TypePacket
ColorCustomized
SizeCustomized
ShapeCustomized
Hardness40 to 85 Shore
Product TypeOil Seal

Oil Seal
Material: Neoprene
Size: according to your requirement
Make: voltomachtm seal

Available for all kind of car and supply the industrial used oil seal

Advantage: good resistance to oil, fuel, lubricants, good compression set,
supper cost-effective

Application: automobile, mining, machinery, chemical equipment, engineering construction, warer pump and etc.

Strong Point: we have our own mold center, can develop most kinds of hight tech requirement.



Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer),Other
  • Port of Dispatch: MUMBAI
  • Packaging Details: EXPORT PACKING.
Get Best QuoteRequest A Callback
Silicon Oil Seal
  • Silicon Oil Seal
  • Silicon Oil Seal
  • Silicon Oil Seal
  • Silicon Oil Seal
  • Silicon Oil Seal
  • Silicon Oil Seal
  • Silicon Oil Seal
  • Silicon Oil Seal
  • Silicon Oil Seal
  • Silicon Oil Seal
  • Silicon Oil Seal
  • Silicon Oil Seal
  • Silicon Oil Seal

Silicon Oil Seal

Product Price: Rs 20 / PieceGet Best Price

Product Details:
ColorRed, Black, Orange
MaterialSilicone
Packaging TypeBox Packaging
SizeAs per client requirement
Product TypeOil Seal

Silicone Oil Seal:

Silicone is soft and elastic, which makes it a good choice in many oil seal applications. Silicon and silicone are closely related. Silicon is a naturally-occurring element while silicone is a polymer that combines silicon atoms with those of oxygen and the H3C hydrocarbon compound.

 

??? Low toxicity, making it useful for food and medical applications

??? Resists degradation by ultraviolet light (sunlight)

??? Low electrical conductivity

??? Repels water

??? Ozone resistant

??? Retains its flexibility over a temperature range of -94 to +392°F



Additional Information:

  • Packaging Details: Box Packaging : L cm B cm X H cm
Get Best QuoteRequest A Callback
PTFE Spring Seals
  • PTFE Spring Seals
  • PTFE Spring Seals
  • PTFE Spring Seals
  • PTFE Spring Seals
  • PTFE Spring Seals
  • PTFE Spring Seals
  • PTFE Spring Seals

PTFE Spring Seals

Product Price: Rs 50 / PieceGet Best Price

Minimum Order Quantity: 10 Piece

Product Details:
Usage/ApplicationIndustrial
ShapeRound
Product TypeSpring Energized Seal
PressureDepend upon the requirement of customer
Shaft DiameterAs per customer requirement
TemperatureMax 260 DegreeC (500 DegreeF)

Spring energized PTFE seals perform reliably in a variety of applications where conventional elastomeric seals fail due to chemical attack, extreme heat or cold, friction, extrusion or compression set.

PTFE seals have three basic design elements:

  • A pressure-actuated U-shaped jacket
  • A metal spring loading device
  • High performance polymeric seal materials
It’s a spring-energized U-cup that uses a variety of jacket profiles, spring types and materials in rod and piston, face and rotary seal configurations. They are used when elastomeric seals fail to meet temperature range, chemical resistance or friction requirements.

Some of the more remarkable capabilities of the seal include:

  • Very low friction
  • Universal chemical compatibility
  • High speed service
  • Cryogenic service to -425 degrees Fahrenheit
  • High temperature service to 575 degrees Fahrenheit
  • High pressure ratings (over 30 Kpsi)
  • Permanent elasticity with immunity to aging embrittlement and compression set.


Additional Information:

  • Packaging Details: Box Packaging
Get Best QuoteRequest A Callback
Nitrile Oil Seal
  • Nitrile Oil Seal
  • Nitrile Oil Seal
  • Nitrile Oil Seal
  • Nitrile Oil Seal
  • Nitrile Oil Seal
  • Nitrile Oil Seal
  • Nitrile Oil Seal
  • Nitrile Oil Seal
  • Nitrile Oil Seal
  • Nitrile Oil Seal
  • Nitrile Oil Seal
  • Nitrile Oil Seal

Nitrile Oil Seal

Product Price: Rs 10 / PieceGet Best Price

Product Details:
Usage/ApplicationIndustrial
SizeAs per client requirement
MaterialRubber
Packaging TypePacket
ColorBlack
Pressure200 and 3,500 PSI
Hardness40 to 75 Shore
Product TypeOil Seal
Temperature40 to +100 DegreeC
Is It CustomizedCustomized

 

The most widely used elastomer in most current applications. It is particularly recommended in case of contact with:
- Mineral oils and fats (oils for engines, gearboxes, differentials, etc.)
- Hydraulic oils
- Water and aqueous solutions.

The temperature range varies from -30°C to + 120°C.

Oil Seal made from nitrile (Buna N) rubber are used widely. Nitrile rubber oil seals perform well in many industry. These oil seal have excellent resistance to oil, have a practical temperature service range, resistance to oxidation and aging, and generally cost less than other oil seals made from more advanced elastomers.

 



Additional Information:

  • Packaging Details: Box Packaging : L cm x B cm x H cm
Get Best QuoteRequest A Callback
DB Oil Seal
  • DB Oil Seal
  • DB Oil Seal
  • DB Oil Seal
  • DB Oil Seal
  • DB Oil Seal

DB Oil Seal

Product Price: Rs 15 / PieceGet Best Price

Minimum Order Quantity: 10 Piece

Product Details:
MaterialDepend upon requirement
BrandWe manufacture our own products
Usage/ApplicationIndustrial
SizeAs per client requirement
ColorBlack
DesignDB Type
DiameterAs per client requirement
Hardness70 to 85 Shore
WeightDepend upon material requirement
Packaging TypeBox
StyleDB
Temperature RangeDepend upon material
Country of OriginMade in India

Description

The DB profile is a shaft seal composed of a single external metal cage with an internal rubber coating and a double primary sealing lip with integrated springs to separate fluids.

Advantages

Good radial rigidity, particularly for large diameters
Good stability when assembled, preventing the bounce-back effect
Sealing for low and high viscosity fluids
Modern sealing lips with low radial forces
Fluid separation system

Applications

  • All types of rotative applications
  • Machine tools
  • Agriculture
  • Construction
  • Transmission
  • Gear boxes
  • Motors
  • Pumps

Materials

Rubber

Nitrile 70 - 85 Shore A
EPDM 70 - 85 Shore A
FKM 70 - 85 Shore A
HNBR 70 - 85 Shore A
NBR 70 - 85 Shore A

Metal cage

Steel
Stainless steel

Spring

Steel
Stainless

 



Additional Information:

  • Delivery Time: Depend upon quantity required
  • Packaging Details: Box Packaging
Get Best QuoteRequest A Callback

Pneumatic Seal Kit

Product Price: Get Latest Price

Get Best QuoteRequest A Callback

EXPLORE MORE CATEGORIES

Contact Us
 
Thank youYour Enquiry has been sent successfully.
© 360 Industrial Products. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.